AAA Pharma Inc.-- Sphygmomanometer


PAX-DS-II (S)	PAX-DS-II (M)

TECHNICAL SPECIFICATION

Data PAX-DS-II (S)

1.The operating table can be applied to general surgical operation
2.The table top surface can be mobiled for C style arm and X-film
3.Stable and flexible basement, is reliable to use
4.Wide range of accessories to meet the requirement of different operation
5.24V low voltage，automatic electric lock device guarantee the operation safety
6.All kinds of operation movement can be controlled by hand-held or the control panel beside the operation table
7.Imported hydraulics control parts make the noise-free,safe,reliable，stable operation.
8.High strength cast aluminum alloy are substantial stuffs, mattress adopts chemical corrosive-proof PU material
9.Auto charge device at base can keep the table to be used when emergency power shut off

ITEM	CONTENTS
Table height(mm)	660mm～960mm
Length and width of table	1950mm*500mm
Reversed Trendelenburg of table	20º
Trendelenburg of table	15º
Left inclining angle of table	15º
Right inclining angle of table	15º
Upward folding angle of back rest	80º
Downward folding angle of back rest	20º
Upward folding angle of head rest	40º
Downward folding angle of head rest	50º
Downward folding angle of leg rest	90º
Outward folding angle of leg rest	90º
Lifting height of waist bridge	120 mm

Standard Accessories	PAX-DS-II (S)
Leg rest	2pcs
Body support holder	2pcs
Arm rest	2pcs
Anesthetic screen holder	2pcs

Data PAX-DS-II (M)

1.The operating table can be widely applied to all kinds of surgical operation
2．Wide range of accessories can be chose
3．The table top surface can be moved for C arm X-RAY
4. 24V low voltage，automatic electric lock device guarantee the operation safety
5. All kinds of operation movement can be controlled by hand-controller or the control panel beside the operation table
6. The high quality electric hydraulic pump and valve are powerful,safety and noise-free
7. The frame and the base is made of the high strength cast aluminum alloy and stainless steel
8. The mattress are made of special memory SFC material.it is soft and comfortable,with plasticity against pressure ulcers effectively
9. Auto charge device at base can keep the table to be used when emergency power shut off
Techanical data

ITEM	CONTENTS
Lifting height of base	660mm～960mm
Length and width of table	2050mm*540mm
Reversed Trendelenburg of table	≥20º
Trendelenburg of table	≥25º
Left inclining angle of table	≥15º
Right inclining angle of table	≥15º
Upward folding angle of back rest	≥75º
Downward folding angle of back rest	≥15º
Upward folding angle of head rest	≥40º
Downward folding angle of head rest	≥50º
Downward folding angle of leg rest	≥90º
Raised degree of complex movement	≥25º
Dented degree of complex movement	≥30º
Range of movement	≥190mm

Standard Accessories	PAX-DS-II (M)
Anesthetic screen holder	1pc
Leg rest	2pcs
Body support holder	2pcs
Arm rest	2pcs

INSTALLATION

1. OPERATING INSTRUCTIONS

Before operating, be sure that operating, be sure that the operating table has been correctly installed as the description in chapter 11
The max load weight of legrest is 30 kg and of headrest is 10 kg.

SYMBOL NOTES

CONTROL PANEL

No.	Operating	Method
1	Lock the operating table	Keep "E" pushed and press "operating locked"
2	Move the operating table	Keep "E" pushed and press "operating unlocked"
3	Raise the operating table	Keep "E" pushed and press "table upwards"
4	Lower the operating table	Keep "E" pushed and press "table downwards"
5	Backrest up inclination	Keep "E" pushed and press "Backrest up inclination"
6	Backrest down inclination	Keep "E" pushed and press "Backrest down inclination" Note: Be carefull about the angle
7	Table left tilt	Keep "E" pushed and press "Table left tilt"
8	Table right tilt	Keep "E" pushed and press "Table right tilt"
9	Table up inclination	Keep "E" pushed and press "Table up inclination"
10	Table down inclination	Keep "E" pushed and press "Table down inclination"
11	Headrest up inclination
12	Headrest down inclination	Support the headrest and pull the shaft out aof the ratchet wheel.
13
14		Loose the triangular switch for the headrest and pull the headrest out.
15		Pull the loop out and pull the largest up slightly to apart from the ratchet wheel, then the largest angle can be adjusted; Release the loop for locking a desired angle.
16		Loose the triangular switch for legrest by 2 or 3 times circles to apart the legrest from the gear wheels; Tilt the legrest outside to reach a desired angle and tight the switch clockwise.
17	Disassemble the legrest	Loose the triangular switch for legrest anticlockwise to apart the legrest from the corse shaft. Assemble it in the reverse.